LSM – Cannulated Superscrews

Features: The differential pitch thread shape is designed for optimal grip and penetration through cortical bone. Torx Head – shape supports a higher torque without degradation. Head Conical shape – Increase the perception of stability once it reaches its final position. Made of Titanium alloy Ti6Al4V, the I.B.S.® Mid and Hindfoot screws are available in 4.5mm, 6.5 mm and 8.0mm diameters. The I.B.S.® screws are delivered in a sterile tube. The I.B.S.™ 6.5mm compression screws are available in two versions : 15mm distal thread (C) and 30mm distal thread (C+)

Compression and neutralisation screw range Features: The design of the I.B.S.™ compression screw is specifically designed to distribute the compression stress, maximize and facilitate bone synthesis. The I.B.S.™ screw is a cannulated, self-drilling and self-tapping screw delivered sterile. Depending on the diameter, I.B.S.™ screws are available in a compressive (C) and in a neutralization (N) version. The I.B.S.™ screw range is offered with the Neosys® single use instrumentation for diameters 2.0 to 3.5mm. For the other diameters reusable Neosys® instrument sets are available.

Features: The Omni Plating System is a universal plating system that accommodates many foot and ankle indications. Plate screws are available in 2.8mm & 3.5mm Non-locking and variable angle locking screw options (30° cone of angulation)   The system offers a PlantarFiX Post, which is a component that locks into the plate and acts as a metal cortex for the 3.5mm cannulated lag screw, providing the following benefits: Significantly increases peak compression (2x vs. independent lag screw)* Provides compression where it is needed most: plantar-side of the construct Compression is independent of patient’s bone quality The PlantarFiX Post is compatible with the locking holes of all the plates in this system. The system includes a targeting system for accurate placement of the 3.5mm lag screw through the post, allowing for reliable and reproducible results.

The Cartilaginator is a specialized surgical instrument engineered for precise joint preparation prior to fusion procedures. Its compatibility with the Stryker TPS power unit ensures seamless integration into existing surgical setups. Surgeons have reported that The Cartilaginator significantly facilitates joint preparation in foot fusion surgeries.

Comprehensive Anatomic Solutions for Every Fracture Location Anatomically contoured for optimal patient fit Unique distal screw hole clusters designed to offer multiple screw placement options. Low profile and chamfered lead-in edges minimize soft tissue irritation.               *NOTE: Post/Screw construct is only available on special request.  

Features:   Broachless Implantation Angled Metatarsal Stem Matches Natural Declination Angle No angled Cuts, Simple Disposable Instruments  

Each Axis Fusion Beam has a corresponding X-Clip. The X-Clip is designed to provide increased thread purchase, compression, and stability for patients with poor quality bone. The use of an X-Clip with an Axis Fusion Beam is optional and left to the surgeon’s discretion. Bridging Advances in Technology and Technique. The Axis Fixation System is cleared specifically for use with Charcot patients. These limb salvage cases require fixation and techniques beyond the standard principles of orthopaedics. The Axis Fixation System provides a Superconstruct™ designed to: Bridge Beyond the Area of Injury Optimize Implant Strength Maximize Mechanical Function